661 EPOXY PRIMER Zn

Two-component solvent-based epoxy primer with metallic zinc flakes. It offers strong adhesion and ensures complete, long-lasting anti-corrosive protection on metal surfaces, creating a rust-resistant grey coating (cold galvanising). It can be top-coated with any type of paint ideally with 630 2K PU, 640 2K ACRYLIC PU or 650 EPOXY 2K.

  • PACKAGING
  • 5KG, 15KG
  • Price & Delivery
  • 1

APPLICATION

Spray gun

  • 2

THINNING

Up to 10% by volume with Thinner 540

  • 3

COVERAGE

3–5 m²/kg for a 70 μm film thickness

  • 4

DRYING TIME

6 hours

INSTRUCTIONS

Preparation and Storage

Contact us
for safety data sheets
& technical specifications
Phone
2310 740.086
Before use
The success of the application depends on proper substrate preparation. Apply to dry, clean surfaces free of dust, and any flaking or loose particles.
After thinning with solvent, apply 670 Epoxy Zn in two coats. Mixing ratio: 5 (A) to 1 (B) by weight. Once the two parts are mixed, the final product must be applied within 50 minutes. Recoat after 6 hours. Full drying in 24 hours. Weather conditions may affect the drying time. Apply at temperatures between 7–35°C.
Store at temperatures between 5–35°C. Practical tip: it is best to mix in a separate container so that any leftover primer stays in the original bucket and keeps for longer. Clean painting tools with solvent immediately after use.
Contact us
for safety data sheets
& technical specifications
Phone
2310 740.086

Quality and Durability

Related Products
660 EPOXY PRIMER 2K

660 EPOXY PRIMER 2K

Construction Resin

Paste Render

Insulating Coating

BRONZE Cement Paint

SILVER Cement Paint

Request for Quote

Fill out the form below, and a Luxorchrom representative will contact you shortly.