Paste Render

Ready-to-use, water-soluble acrylic paste render. It creates a textured finishing coat of high aesthetic quality. It provides high resistance to temperature and solar radiation. It contains glass fibres. Suitable for external thermal insulation systems. It has excellent adhesion to all building elements such as concrete, cement adhesives, cement renders, cement board, plasterboard, extruded and expanded polystyrene, rock wool and more. It does not crack and is compatible with all common thermal-facade systems. Available in 3 grain sizes: 0.3–0.8, 0.8–1.5 and 1.5–2.0 mm.

  • PACKAGING
  • 25KG
  • Price & Delivery
  • 1

APPLICATION

spatula

  • 2

THINNING

none

  • 3

COVERAGE

3kg/m²

  • 4

DRYING TIME

1 hour

INSTRUCTIONS

Preparation and Storage

Contact us
for safety data sheets
& technical specifications
Phone
2310 740.086
Before use
The success of the application depends on the correct preparation of the substrate. It is applied on dry surfaces that are clean and free from dust, grease, and loose or flaking particles. On new surfaces, an initial application of LUXORCHROM Water-Based Acrylic Primer is required.
It is applied without thinning in two coats. Then, immediately or within a few minutes and when the coating has just begun to set (take care during the summer months), rub with a special plastic float or metal spatula, depending on the desired result.
Stored at temperatures from 5 – 35°C. The painting tools are washed with water immediately after use.
Contact us
for safety data sheets
& technical specifications
Phone
2310 740.086

Quality and Durability

Related Products
660 EPOXY PRIMER 2K

660 EPOXY PRIMER 2K

Construction Resin

Paste Render

Insulating Coating

BRONZE Cement Paint

SILVER Cement Paint

Request for Quote

Fill out the form below, and a Luxorchrom representative will contact you shortly.