Insulating Coating

Acrylic elastomeric waterproofing coating for exterior use. It forms a flexible film that provides insulation against moisture and protection from the weather. It is ideal for new and old surfaces, rooftops, parapets, light wells and tiled roofs, and is applied in two coats.

  • PACKAGING
  • 0,75L, 3L, 10L
  • Price & Delivery
  • 1

APPLICATION

Roller, brush, spray gun

  • 2

THINNING

50% with water for the first application

  • 3

COVERAGE

1-2 m²/L

  • 4

DRYING TIME

2-3 hours

INSTRUCTIONS

Preparation and Storage

Contact us
for safety data sheets
& technical specifications
Phone
2310 740.086
Before use
The success of the application depends on the correct preparation of the substrate. It is applied on dry surfaces that are clean and free from dust, grease, and loose or flaking particles. On new surfaces, an initial application of LUXORCHROM White Spirit-Based Primer or LUXORCHROM Water-Based Acrylic Primer is required.
If no primer is used, thin 50% with water only for the first coat. For recoating, surface drying (2-3 hours) is not sufficient. It is important that the second coat is applied after the first has dried well, that is, in 24 hours. Weather conditions may vary the drying time. Applied at temperatures from 10 – 30°C.
Stored at temperatures from 5 – 35°C. Practical tip: it is best to do the thinning in a separate container so that, if any paint is left over, it remains unthinned in the original bucket and lasts longer. The painting tools are washed with water immediately after use.
Contact us
for safety data sheets
& technical specifications
Phone
2310 740.086

Quality and Durability

Related Products
660 EPOXY PRIMER 2K

660 EPOXY PRIMER 2K

Construction Resin

Paste Render

Insulating Coating

BRONZE Cement Paint

SILVER Cement Paint

Request for Quote

Fill out the form below, and a Luxorchrom representative will contact you shortly.