Water-Based Enamel Paint

Water-based, acrylic enamel paint for a glossy finish on wooden and metal surfaces. It spreads easily and forms a flexible membrane with high durability. It does not yellow, and is available in white and pastel shades with the tinting system.

  • PACKAGING
  • 0,75L, 3L
  • Price & Delivery
  • 1

APPLICATION

Roller, brush, spray gun

  • 2

THINNING

up to 10% with water

  • 3

COVERAGE

10-12m²/L

  • 4

DRYING TIME

1 hour

INSTRUCTIONS

Preparation and Storage

Contact us
for safety data sheets
& technical specifications
Phone
2310 740.086
Before use
The success of the application depends on the correct preparation of the substrate. It is applied on dry, clean surfaces free from dust, grease, and loose or flaking particles. On new surfaces, an initial application of Water-Based Undercoat is required.
After thinning with water, apply two coats of the Water-Based Gloss Paint. It is important that the second coat is applied after the first has dried on the surface, that is, in 1 hour. Weather conditions may vary the drying time. Applied at temperatures from 10 – 35°C.
Stored at temperatures from 5 – 35°C. Practical tip: it is best to do the thinning in a separate container so that, if any gloss paint is left over, it remains unthinned in the original bucket and lasts longer. The painting tools are washed with water immediately after use.
Contact us
for safety data sheets
& technical specifications
Phone
2310 740.086

Quality and Durability

Related Products
660 EPOXY PRIMER 2K

660 EPOXY PRIMER 2K

Construction Resin

Paste Render

Insulating Coating

BRONZE Cement Paint

SILVER Cement Paint

Request for Quote

Fill out the form below, and a Luxorchrom representative will contact you shortly.