600 Enamel Paint

Fast-drying, solvent-based industrial enamel paint on an alkyd base. Extremely glossy finish, maximum hardness and resistance to time and weather. Suitable for painting metal, steel structures and agricultural machinery. Combines ideally with the NX500 hardener.

  • PACKAGING
  • 2,5L, 10L, 20L
  • Price & Delivery
  • 1

APPLICATION

Spray gun

  • 2

THINNING

up to 10% by volume with Thinner 520, 560, 570

  • 3

COVERAGE

7-9 m²/kg for 70 μm film thickness

  • 4

DRYING TIME

3 hours

INSTRUCTIONS

Preparation and Storage

Contact us
for safety data sheets
& technical specifications
Phone
2310 740.086
Before use
The success of the application depends on the correct preparation of the substrate. It is applied on dry, clean surfaces free from dust, and loose or flaking particles.
After thinning with thinner, apply two coats of paint 600. Full drying in 24 hours. Improved properties and drying time with the addition of NX500. Weather conditions may vary the drying time. Applied at temperatures from 7 – 35°C.
Stored at temperatures from 5 – 35°C. Practical tip: it is best to do the thinning in a separate container so that, if any paint is left over, it remains unthinned in the original bucket and lasts longer. The painting tools are washed with thinner immediately after use.
Contact us
for safety data sheets
& technical specifications
Phone
2310 740.086

Quality and Durability

Related Products
660 EPOXY PRIMER 2K

660 EPOXY PRIMER 2K

Construction Resin

Paste Render

Insulating Coating

BRONZE Cement Paint

SILVER Cement Paint

Request for Quote

Fill out the form below, and a Luxorchrom representative will contact you shortly.