METALLIZED 300

Anti-rust paint that is applied to metal and galvanised surfaces directly over rust, without the need for a primer. It protects and decorates, has strong adhesion and excellent spreadability, and gives the surface a textured matt, metallic finish. Available in 8 ready-to-ship shades.

APPLICATION

Brush, spray gun

THINNING

5% with LUXOR Thinner for brush application, 25% with LUXOR Thinner for spray gun application

COVERAGE

3.5 – 7 m²/L for 150 – 75 μm dry film thickness respectively

DRYING TIME

Surface-dry in 4 hours, recoat in 24 hours.

INSTRUCTIONS

Preparation and Storage

Contact us
for safety data sheets
& technical specifications
Phone
Before use
The success of the application depends on the correct preparation of the substrate. It is applied on dry, clean surfaces free from dust, and loose or flaking particles.
After thinning with thinner, apply Metallized 300 in two coats. Recoat in 24 hours. The next coat is applied after the previous one has dried (always after a test). Weather conditions may vary the drying time. Applied at temperatures from 7 – 35°C.
Stored at temperatures from 5 – 35°C. Practical tip: it is best to do the thinning in a separate container so that, if any primer is left over, it remains unthinned in the original bucket and lasts longer. The painting tools are washed with thinner immediately after use.
Contact us
for safety data sheets
& technical specifications
Phone

Quality and Durability

Related Products

Request for Quote

Fill out the form below, and a Luxorchrom representative will contact you shortly.