Wood Oil

Clear acrylic protective solvent-based oil for wooden surfaces. It contains a UV filter and is resistant to solar radiation. It penetrates the wood easily and withstands moisture. It does not form a film.

  • PACKAGING
  • 0,75L, 2,5L
  • Price & Delivery
  • 1

APPLICATION

Roller, brush, spray gun

  • 2

THINNING

5-10% with thinner 520

  • 3

COVERAGE

8-12m²/L

  • 4

DRYING TIME

1 hour

INSTRUCTIONS

Preparation and Storage

Contact us
for safety data sheets
& technical specifications
Phone
2310 740.086
Before use
It is applied on dry and clean surfaces. It is advisable to sand the surface with fine sandpaper before application. The success of the application depends on the correct use of the material.
After thinning with thinner, apply one coat of the Wood Oil. Full drying in 24 hours. Weather conditions may vary the drying time. Applied at temperatures from 7 – 35°C.
Stored at temperatures from 5 – 35°C. Practical tip: it is best to do the thinning in a separate container so that, if any enamel paint is left over, it remains unthinned in the original bucket and lasts longer. The painting tools are washed with thinner immediately after use.
Contact us
for safety data sheets
& technical specifications
Phone
2310 740.086

Quality and Durability

Related Products
660 EPOXY PRIMER 2K

660 EPOXY PRIMER 2K

Construction Resin

Paste Render

Insulating Coating

BRONZE Cement Paint

SILVER Cement Paint

Request for Quote

Fill out the form below, and a Luxorchrom representative will contact you shortly.