710 Galvanised / INOX Primer

Solvent-based primer with very good adhesion on non-ferrous surfaces such as galvanised metal, aluminium, stainless steel, copper, etc. It has high flexibility, provides anti-rust protection and spreads easily.

  • PACKAGING
  • 1KG, 4KG, 12KG
  • Price & Delivery
  • 1

APPLICATION

Roller, brush, spray gun

  • 2

THINNING

Up to 10% by volume with Thinner 520

  • 3

COVERAGE

12m²/Kg

  • 4

DRYING TIME

40 minutes

INSTRUCTIONS

Preparation and Storage

Contact us
for safety data sheets
& technical specifications
Phone
2310 740.086
Before use
The success of the application depends on proper substrate preparation. Apply to dry, clean surfaces free of dust, and any flaking or loose particles. – Recoating with 2K paint is not recommended.
After thinning with solvent, apply the Galvanised / INOX Primer in two coats. Final drying in . Recoat after 6 hours. Weather conditions may affect the drying time. Apply at temperatures between 7–35°C.
Store at temperatures between 5–35°C. Practical tip: it is best to thin in a separate container so that any leftover primer stays unthinned in the original bucket and keeps for longer. Clean painting tools with solvent immediately after use.
Contact us
for safety data sheets
& technical specifications
Phone
2310 740.086

Quality and Durability

Related Products
660 EPOXY PRIMER 2K

660 EPOXY PRIMER 2K

Construction Resin

Paste Render

Insulating Coating

BRONZE Cement Paint

SILVER Cement Paint

Request for Quote

Fill out the form below, and a Luxorchrom representative will contact you shortly.